| Label |
CD50 Black
|
| Item number | V-40V0050-032 |
| E-number | 13 606 25 |
| Power | 1-50W (cos φ =1) |
| Voltage | 220-240V |
| Switching type | Double-pole |
| Input current | 0.22A |
| Function | Rotary trailing edge dimming |
| On/Off | Dial click |
| Operating temperature | -20°C to +40°C |
| Tc max | 43°C |
| Color | Matt black (NCS 9500) |
| Casing material | PC |
| Connection | Screw-based terminal block (max. 2.5 mm²) |
| Transient protection | Yes, 2kV |
| Overload protection | Yes, automatic reset |
| Overheating protection | Yes, 115°C automatic reset |
| Short-circuit protection | Yes, automatic reset |
| Soft start | No |
| Working humidity | <90% RH non-condensing |
| Casing classification | IP20 |
| Dimming | 0% – 100% |
| Insulation classification | IP20 |
| Manufacturing standards | EN 61058-2-1: 2011, EN 61058-1: 2019, EN 55015: 2013+A1:2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013, EN 61058-2-1:2010 |
| Certifications | CE |
Cable dimmer CD50 Black
CD50 is a Swedish-designed cable dimmer with double-pole switching. The dimmer is installed directly on the cable to the load and provides dimming options for e.g., table lamps, floor lamps and window lamps. The dimming is done via knobs with clicks for on and off.
Adapted for LED, 230V halogen, incandescent, dimmable LED drivers and electronic transformers up to 50W (cos φ = 1).
Beskrivning
Adjustment of maximum dimmer level/flicker
Maximum dimming load for loads that need extra adjustment. Used for loads when flicker occurs in the maximum dimmed position. Can also be used for fine adjustment of the highest dimmer level. Procedure: Dimming the load to maximum light. For flicker, turn the potentiometer clockwise with a screwdriver to reduce the amount of flicker. Keep turning until you reach the dimmer level you want and no flicker occurs. When fine-tuning, turn the potentiometer clockwise with a screwdriver and stop just before the light starts to dim. Keep turning until you reach the dimming level you want.
Fine adjustment of the minimum dimmer level
For the most common loads. Procedure: Dim the load to minimal brightness. Turn the potentiometer clockwise with a screwdriver to set the minimum dimmer level. Keep turning until you reach the dimmer level you want and no flicker occurs.
